不锈钢浮雕如何制作？金兰草浮雕公司告诉大家：
    Stainless steel relief how to make? The company told us relief Jinlan grass:

    不锈钢浮雕抛光。
    Stainless steel relief.

    首先用砂轮片把制作作品的焊缝和多余的地方磨平，然后用软轮进行抛制，抛光时作品涂上抛光膏增加润滑，使作品抛出来更光亮，从而给人一种良好的视觉美感。
    First grinding wheel sheet for the production welds and superfluous polished, and then use soft round throw of, polishing works coated with polishing paste increases lubrication, make work thrown out more bright, in order to give people a good visual sense of beauty.

    大型的不锈钢浮雕，可不用焊接，根据作品的形体比例直接做好钢筋骨架，用电钻在设计好的位置上打眼，把不锈钢板用铆钉固定在骨架上就可以了。
    A large stainless steel relief, without welding, according to the ratio of the body works do reinforced skeleton, with a drill hole in the designed position drilling, the stainless steel plate with a rivet is fixed on the framework can be.

    不锈钢浮雕的制作，并不是在模具上敲打成型，而是根据石膏模型每个部分不同的形状把料裁剪下来下出，依照其起伏变化，进行有意识地敲打，该弯的地方敲弯，该棱的地方敲棱。
    Stainless steel relief and not on the mold beat it into shape. But according to the different shape of gypsum model each parts to cutting down under and in accordance with its ups and downs, consciously knock, local clinch the curved, the edge of the knock edge.

    可在任何有形的结实的物体上进行敲打，然后把敲好的不锈钢板拿到模具上去比较，认为形体正确并完全可以与模型合上，再把这些零散的不锈钢板从上至下一块块焊接起来，每接上一块都要对着模具进行调整，每块不锈钢板表面的肌理效果都要保持相同，这须在做形的同时锻制上去，也可以先把点锻好再下料。
    In any tangible solid objects to beat, then knocked at the stainless steel plate to get die up more that the form correctly and completely and model, then these scattered stainless steel plate from top to pieces welded together, each received a must to carry on the adjustment of the mould, each stainless steel plate surface texture effects are to remain the same, which shall be in form and wrought up, you can also put some exercise is good for unloading.

    锻点时要用铁锤的圆头均匀地有规律地一排排锻上，宽窄距离、用力大小都要一致，不要胡乱敲，否则会破坏浮雕的整体感，形体锻造正确后，就要依照作品要求把它们焊接到一起。
    Forging hammer head uniformly regular row row of forging, width of the distance, size of the force must be consistent, do not casually knock, otherwise it will undermine the sense of relief as a whole, body forging is correct, according to the work requirements of the welded them together.

    由于焊接时产生高度的光，对眼睛有强刺激，所以要戴好防护罩，避免被强光打伤。用电焊焊接，在不锈钢浮雕焊接中，常用钨极氩弧焊，可得到优良焊接质量。但是它不易导热，所以不锈钢容易发生变形。
    Due to the high degree of light produced by welding, the eyes have strong stimulation, so wear a good protective cover, to avoid being bright light. Welding with welding, welding in stainless steel, commonly used tungsten argon arc welding, can get good welding quality. But it is not easy to heat, so the deformation of stainless steel.